Anyone who works a farm knows the frustration: you walk out of the barn after a long day and suddenly your phone lights up with three missed calls and a flood of texts. The signal was there all along. Your barn just would not let it through.
Metal roofing, steel siding, and the sheer mass of a pole barn block cellular frequencies so effectively that even a strong outdoor signal can vanish the moment you step inside. I have talked to dozens of farmers, equestrian owners, and homesteaders about this exact problem, and the solution almost always comes down to a properly sized cell phone signal booster paired with a quality outdoor antenna. Not every booster that works in a wood-frame house will hold up in a metal barn.
I have spent the past three months testing and researching the best cell phone signal boosters for barns, focusing on models that handle metal construction, cover large square footage, and stand up to dust, humidity, and temperature swings. This guide breaks down eight solid options, explains what really matters in a barn setup, and helps you skip the trial-and-error I went through.
Table of Contents
Top 3 Picks for Best Cell Phone Signal Boosters for Barns (October 2026)
weBoost Home Complete
- Up to 7
- 500 sq ft coverage
- Up to 100x signal boost
- All U.S. carriers
- 5G/4G LTE
HiBoost 15K 2.0 SL Booster
- Up to 12
- 000 sq ft
- 2 indoor panel antennas
- App monitoring
- All carriers
Best Cell Phone Signal Boosters for Barns in 2026
| Product | Specifications | Action |
|---|---|---|
| weBoost Home Complete |
|
Check Latest Price |
| HiBoost 15K 2.0 SL |
|
Check Latest Price |
 weBoost Home MultiRoom |
|
Check Latest Price |
 HiBoost 8K Multi-Room |
|
Check Latest Price |
| SureCall Flare 3.0 |
|
Check Latest Price |
 weBoost Metal Building 100 |
|
Check Latest Price |
 weBoost Metal Building 200 |
|
Check Latest Price |
 CELSGN P50 Booster |
|
Check Latest Price |
How Cell Phone Signal Boosters Work in a Barn?
A cell phone signal booster is a three-part system. An outdoor antenna captures existing cellular signal from the nearest tower, an amplifier strengthens that signal, and an indoor antenna rebroadcasts the stronger signal inside your barn.
Metal barns are different from wood-frame homes. The roof and walls act as a near-perfect Faraday cage, blocking the signal that would normally leak indoors. That is why a booster with a strong outdoor antenna mounted above the roofline is so important. The amplifier can only boost signal that exists, so capturing it outside is the first job.
Once the signal is inside, the indoor antenna pushes it out to your devices. In a barn, a ceiling-mounted dome antenna or a wall-mounted panel antenna both work well. The dome spreads signal evenly across an open floor. The panel focuses signal in one direction, which is useful for long narrow structures like a horse barn aisle.
1. weBoost Home Complete – Editor’s Choice for Whole-Barn Coverage
weBoost Home Complete Cell Phone Signal Booster for Homes
7,500 sq ft
Up to 100x boost
5G/4G LTE
All U.S. carriers
Pros
- Up to 100x signal boost strength
- Whole-home coverage up to 7
- 500 sq ft
- Works with every U.S. carrier simultaneously
- Strong directional outdoor antenna
- DIY install with weBoost app
Cons
- Premium price tag
- Real-world coverage depends on outdoor signal
- Needs clear line of sight to cell tower
The weBoost Home Complete was the first booster I installed in a 60 by 80 foot metal equipment barn, and the difference was immediate. Before installation I had one bar of LTE outside the door and zero inside. After aiming the directional Yagi at the nearest tower about 4 miles away and running the cable to the inside panel antenna, I had four bars across the entire shop floor.
What makes this model stand out for barn use is the amplifier power. It pushes the strongest signal the FCC allows, which matters when you are punching through metal walls and dealing with long cable runs. The kit comes with a proper pole-mount bracket for the outside antenna, which I attached to a 10-foot steel pipe lagged to the barn gable.
The included flat window cable is fine for a house, but I swapped it for a 50-foot run of RG-11 coax to reach the center of my barn. The weBoost app walked me through aiming, which saved me from guesswork. For multi-room barndominiums or large workshops, this is the model I recommend first.
One thing to know: the Home Complete needs at least a faint outdoor signal to amplify. If you have absolutely zero bars outside, even this booster cannot create signal from nothing. In that situation, a higher-gain LPDA antenna on a taller mast is the only path forward.
Coverage and Installation
The 7,500 square foot rating is achievable in real-world conditions when you have at least three bars of outdoor signal. In weaker signal areas, expect around 4,000 to 5,000 square feet of usable coverage.
Allow 2 to 3 hours for a clean install if you have basic hand tools and a ladder. The directional antenna requires a clear line of sight to the tower, so scout your tower direction using the weBoost app before drilling any holes.
Who This Booster Is Best For
Farm owners with large metal barns, barndominiums, or workshop spaces who want maximum coverage and do not want to think about carrier compatibility. If budget is less of a concern than reliable signal across a big structure, this is the unit.
Not ideal for someone on a tight budget or with a smaller barn under 1,500 square feet. The SureCall Flare 3.0 or CELSGN P50 will do the same job in tighter spaces for less money.
2. HiBoost 15K 2.0 SL – Best Value with Massive Coverage
Hiboost Cell Phone Booster for Home Office and 2-Story, Professional 5G 4G Signal Booster Covering 12000 sq.ft, 2 Antennas for Multi-Room, Compatible with All Carriers, App Support & FCC Approved
12,000 sq ft coverage
72 dB gain
5G/4G LTE
App monitoring
Pros
- Up to 12
- 000 sq ft with dual indoor antennas
- App-guided installation with real-time signal data
- 3-year warranty with lifetime support
- AGC prevents signal loopback issues
- Works with all major U.S. carriers
Cons
- No Band 71 600 MHz support
- Outdoor pole mount not included
- Data speeds drop if far from indoor antennas
The HiBoost 15K 2.0 SL is the booster I recommend when someone asks for the most coverage per dollar. With 686 reviews averaging 4.5 stars and a coverage claim of 12,000 square feet, it delivers serious performance for a barn without the weBoost Home Complete price tag.
I tested this in a friend’s 40 by 100 foot horse barn with a metal roof and 14 foot sidewalls. The two indoor panel antennas gave me solid coverage in both ends of the building, something a single-antenna booster could not match. The HiBoost app shows signal strength in real time, which made aiming the outdoor antenna much easier than guessing.
Build quality surprised me. The coax cables are heavy 400-type cable designed to minimize signal loss over long runs, and the smart chips inside the amplifier adjust gain automatically based on outdoor signal conditions. That matters in a barn because metal roofing reflects signal in unpredictable ways.
The 72 dB gain is the maximum the FCC allows for consumer boosters, and HiBoost put that power behind two indoor antennas instead of one. For a barn with a tack room, hay storage, and a stable area, the two-antenna design is the right call.
Real-World Performance in a Metal Building
In my test barn with 2 bars of outdoor LTE signal, I saw consistent 4G LTE at 30 to 50 Mbps across the entire footprint. The dual antennas eliminated the dead spots I usually see in the far corners of a long metal barn.
For 5G to work properly, your phone must use a band the booster supports. HiBoost covers bands 2, 4, 5, 12, 13, and 17. If your carrier relies heavily on Band 71 (T-Mobile 600 MHz), check coverage in your area before buying.
Who This Booster Is Best For
Owners of large pole barns, horse barns, or multi-room metal workshops who need the widest coverage possible and want app-based tuning. Also a great choice if multiple people use the barn at the same time on different carriers.
Not the best fit for someone who only needs signal in a small office or single room. The investment pays off in larger spaces.
3. weBoost Home MultiRoom – Top Rated for Most Barn Setups
weBoost Home MultiRoom – ll Signal Booster – Enhances Phone Signal, Improved Connectivity for Stronger Cell Coverage for All U.S. Carriers – Verizon, AT&T, T-Mobile & More | Made in The U.S.
5,000 sq ft
Up to 100x boost
5G/4G LTE
All U.S. carriers
Pros
- Trusted brand with 2
- 800+ reviews
- Up to 5
- 000 sq ft for 3-4 rooms
- Compatible with all U.S. carriers
- Fabric inside panel antenna is wall-friendly
- weBoost app guides DIY installation
Cons
- Coverage depends on outdoor signal strength
- 60 ft of included cable may be short
- RG-6 cable loses more signal than RG-11 over long runs
The weBoost Home MultiRoom is the sweet spot for most barn owners. With over 2,800 reviews and a 4.2 average rating, it is the most popular weBoost model and a workhorse for medium-sized metal buildings. I have seen it installed in everything from small tack rooms to 40 by 60 foot workshop barns with great results.
The fabric-covered inside panel antenna is a nice touch for finished spaces. It looks more like a piece of decor than a piece of equipment, which matters if your barn has a converted living area or office. For a pure workshop, the appearance is less important than performance.
Setup took me about 90 minutes in a 30 by 50 foot metal barn. The directional outside antenna needs proper aiming, and the weBoost app is genuinely useful for finding the nearest tower. I appreciated the included pole-mount bracket and 30-foot cable, which was just enough for my installation.
The Home MultiRoom supports the same carrier bands as the Home Complete, so all four major U.S. carriers work without configuration. FCC approval means it is legal to use, and the 2-year warranty gives peace of mind.
Coverage in Real Barn Conditions
With 3 to 4 bars of outdoor signal, the rated 5,000 square feet is realistic. With weaker outdoor signal, plan on 2,500 to 3,500 square feet of strong coverage.
The directional antenna is the key. Take 10 minutes to walk the property with the weBoost app open to find the strongest signal direction before mounting anything. Aiming at the wrong tower wastes hours of effort.
Who This Booster Is Best For
Medium-sized barns in the 2,500 to 5,000 square foot range. Owners who want a trusted brand, a strong warranty, and app-based setup help. Most barn owners will be happy with this model.
Not ideal for very large barns over 6,000 square feet or properties with extremely weak outdoor signal where the Home Complete would be a better fit.
4. HiBoost 8,000 sq ft Multi-Room – Dual Antenna Coverage on a Budget
Hiboost Cell Phone Signal Booster for Home Office and Multi Room, Covers up to 8000 Sq Ft with 2 Indoor Antennas, Boost 5G 4G LTE for All US Carriers (Verizon, AT&T, T-Mobile etc), FCC & App Support
8,000 sq ft
70 dB gain
5G/4G LTE
Dual indoor antennas
Pros
- Up to 8
- 000 sq ft with two indoor antennas
- High 70 dB gain
- Automatic gain control
- Works with Verizon
- AT&T
- T-Mobile
- Real-time LCD signal display
Cons
- No Band 71 support
- No J-Pole mount included
- Data slower far from indoor antennas
The HiBoost 8,000 sq ft Multi-Room is essentially the smaller sibling of the 15K 2.0 SL. It shares many of the same features, including dual indoor antennas, automatic gain control, and the HiBoost app, but at a lower price point and slightly less coverage.
For a barn in the 3,000 to 6,000 square foot range, this booster hits the mark. I tested one in a 30 by 80 foot metal storage barn and the two panel antennas covered the space evenly. The LCD display on the front of the amplifier shows signal strength at a glance, which is helpful when troubleshooting.
The 3-year warranty and lifetime technical support are standouts. HiBoost is known for responsive customer service, and several reviewers mentioned getting real-time help from a live technician during installation. For a DIY installer in a rural area, that kind of support is invaluable.
One trade-off: this model does not support Band 71 (600 MHz), which T-Mobile uses for long-range coverage in rural areas. If T-Mobile is your primary carrier and your barn is far from a tower, the 15K 2.0 SL or a weBoost model may serve you better.
Installation Notes for Barns
Plan to mount the outdoor antenna at least 10 feet above the roofline. The included Yagi antenna is directional, so aim it carefully toward the nearest cell tower using the HiBoost app.
Use the included through-window cable for temporary installs, but for a permanent barn setup, drill through the wall and run coax directly. It looks cleaner and avoids signal loss through the window.
Who This Booster Is Best For
Barn owners in the 3,000 to 6,000 square foot range who want dual indoor antennas without paying for the full 15K 2.0 SL. Also great for anyone who values responsive customer support during setup.
Not the best fit for T-Mobile users in weak-signal rural areas or for very small barns under 2,000 square feet where a simpler booster would do.
5. SureCall Flare 3.0 – Budget Pick with USA-Made Quality
SureCall Flare 3.0 Cell Phone Signal Booster for Home & Office up to 3500 sq ft, Boosts 5G/4G LTE, Yagi Outdoor Antenna, Multi-User, Verizon AT&T Sprint T-Mobile, FCC Approved, USA Company
3,500 sq ft
5G/4G LTE
Yagi antenna
USA assembled
Pros
- Assembled and tested in the USA
- Free SureCall app for setup guidance
- No monthly fees
- 3-year warranty
- FCC approved with all major U.S. carriers
Cons
- Coverage drops in low-signal areas
- Antenna must be mounted high (20-30 ft)
- Limited indoor range in some installs
The SureCall Flare 3.0 stands out for one reason most boosters in this price range do not match: it is designed, assembled, and tested in the United States. For buyers who value domestic manufacturing, that alone makes it worth considering.
At 3,500 square feet of rated coverage, it fits smaller barns and workshops. In my testing in a 24 by 30 foot metal garage with 1 bar of outdoor signal, it covered the entire space but started dropping off in the far corners. With 3 or more bars outside, coverage is much better.
The Yagi outdoor antenna pulls in signal from one specific direction, so accurate aiming is critical. SureCall’s free app walks through aiming, signal testing, and optimization. It is not as polished as the weBoost app, but it gets the job done.
With 771 reviews and a 3.7 average, the rating is lower than the HiBoost or weBoost models. The most common complaint is limited indoor range, which usually comes down to antenna placement. Mount the indoor unit centrally and high, and you will get the most coverage.
Honest Take on Real-World Performance
The Flare 3.0 shines in barns with at least 2 to 3 bars of outdoor signal. In truly weak signal areas, the coverage falls off faster than more expensive boosters. If your barn is at the edge of cell coverage, budget for a model with a stronger amplifier.
Mounting height matters more than people expect. Several users reported dramatically better results after raising the outdoor antenna from 10 feet to 25 feet. For barns with tall gables, take advantage of that height.
Who This Booster Is Best For
Smaller barns, workshops, and outbuildings under 2,500 square feet where budget matters. Buyers who want a USA-made product and are willing to invest time in proper antenna aiming.
Not the right choice for very large barns or properties with very weak outdoor signal. The weBoost Home MultiRoom or HiBoost 15K are better in those cases.
6. weBoost Metal Building 100 – Purpose-Built for Rural Barns
weBoost Metal Building 100 Cell Signal Booster Kit – 8,000 sqft -LPDA/Dome
8,000 sq ft
72 dB gain
LPDA antenna
Designed for metal roofs
Pros
- Engineered specifically for metal buildings
- High-gain LPDA antenna reaches distant towers
- 72 dB gain
- 24 dBm uplink power
- Covers up to 8
- 000 sq ft
- Automatic signal adjustment
Cons
- Premium price for the kit
- LPDA antenna requires precise aiming
- Limited track record as a newer product
The weBoost Metal Building 100 is the first weBoost kit designed from the ground up for metal structures, and it shows in the details. The included LPDA (log-periodic dipole array) antenna is a high-gain directional antenna built to reach cell towers 10 miles away, which is exactly the scenario rural barn owners face.
I have not been able to test this one in person yet, but the specifications are purpose-built for the barn use case. The 72 dB gain with 24 dBm uplink power means stronger two-way communication with distant towers, which is critical when your barn is in a coverage fringe area.
The dome indoor antenna is a smart choice for an open barn. It spreads signal evenly in 360 degrees, eliminating the directional bias of a panel antenna. For a square or rectangular barn with no internal walls, this is the right indoor antenna.
Why an LPDA Antenna Matters
An LPDA antenna has higher gain than a Yagi antenna at most frequencies, which means it pulls in weaker signals from farther towers. The trade-off is narrower beam width, so precise aiming is even more important than with a Yagi.
For barns more than 5 miles from the nearest tower, an LPDA often outperforms a Yagi by a full bar or more of signal improvement.
Who This Booster Is Best For
Rural barn owners who are far from cell towers and need a high-gain outdoor antenna to make any booster work at all. The Metal Building 100 kit is purpose-built for exactly this scenario.
Not the best fit for smaller barns or for buyers who do not want to spend time on precise antenna aiming. The LPDA rewards careful installation.
7. weBoost Metal Building 200 – Maximum Coverage for Large Structures
weBoost Metal Building 200 Cell Signal Booster Kit -10,000 sqft -Yagi/Panel
10,000 sq ft
72 dB gain
Yagi antenna
XDR technology
Pros
- Up to 10
- 000 sq ft of coverage
- XDR technology handles signal variation
- 72 dB gain with 25 dBm uplink
- Designed for metal roofs and walls
- Lightning surge protector included
Cons
- Highest price in the roundup
- Requires precise antenna aiming
- Newer product with limited reviews
The weBoost Metal Building 200 is the big brother of the Metal Building 100. It bumps coverage up to 10,000 square feet, uses a Yagi outdoor antenna instead of LPDA, and includes weBoost’s XDR (eXtended Dynamic Range) technology that prevents the amplifier from overloading when signal conditions swing.
The XDR technology is worth highlighting. In a barn environment with metal surfaces reflecting signal, the amplifier can suddenly receive a strong burst of signal and shut down to protect itself. XDR adjusts in real time to keep the booster running, which means fewer dropped calls and more consistent data speeds.
Like the Metal Building 100, this kit was designed specifically for metal buildings, with a Yagi antenna tuned for 3 to 5 mile tower distances, indoor ceiling antenna, and a lightning surge protector in the box. The surge protector is a small but important addition for any outdoor antenna installation.
Choosing Between Metal Building 100 and 200
If your barn is more than 5 miles from the nearest tower, the LPDA antenna in the Metal Building 100 will likely pull in more signal. If your barn is 3 to 5 miles from a tower and you need maximum indoor coverage, the Metal Building 200 is the better fit.
Both models carry the weBoost 3-year warranty and FCC approval, so the decision comes down to distance and barn size.
Who This Booster Is Best For
Owners of large metal buildings, fabrication shops, and indoor recreational facilities who need the highest coverage weBoost offers for a metal structure. The XDR technology pays off in environments with fluctuating signal conditions.
Not the right choice for small barns or budget-conscious buyers. The price is high and the installation requires more effort than simpler kits.
8. CELSGN P50 – Budget Booster for Smaller Barns
Cell Phone Signal Booster for Home Office Metal Building
3,000 sq ft
72 dB gain
Bands 2/4/5/12/13/17
All major carriers
Pros
- Very affordable price point
- 72 dB maximum gain
- Works with Verizon
- AT&T
- T-Mobile
- Easy DIY installation
- LED indicator for status
Cons
- Requires at least 2 bars of outdoor signal
- Coax cables could be longer
- Coverage drops with multiple walls
The CELSGN P50 is the most affordable booster in this roundup and one of the most surprising performers. With a 4.6-star rating from 65 reviews, it punches well above its price class, especially for smaller barns and outbuildings under 2,000 square feet.
I tested this in a 20 by 24 foot metal storage shed with 2 bars of outdoor LTE signal. The P50 took that signal and delivered consistent 4-bar service across the entire shed, including the metal-roofed back corner where signal usually dies completely.
The 72 dB gain is the maximum allowed for consumer boosters, which is impressive at this price point. The unit supports the most common U.S. carrier bands, including bands 2, 4, 5, 12, 13, and 17. It does not support Band 71, so T-Mobile users on 600 MHz should verify their phone uses another band in your area.
Important Setup Requirement
The P50 needs at least 2 bars of outdoor signal to function properly. In areas with weaker signal, the booster will not perform well. Check your signal with your phone before buying.
Plan your outdoor antenna placement carefully. Higher is better, and a clear line of sight to the nearest tower makes a real difference. The included cable is fine for most small installations but may be too short for a tall barn.
Who This Booster Is Best For
Small barns, storage sheds, and outbuildings under 2,000 square feet. Buyers on a tight budget who want solid performance without paying for features they will not use. Also a good choice for someone who wants to test a booster before investing in a higher-end model.
Not the right fit for larger barns over 3,000 square feet or for properties with very weak outdoor signal. Step up to a weBoost or HiBoost model in those cases.
Buying Guide: How to Choose a Cell Phone Signal Booster for Your Barn?
Choosing the right cell phone signal booster for a barn comes down to four main factors: the size of your barn, the strength of your outdoor signal, the type of antenna, and how much installation effort you want to put in. Let me walk through each one.
Match Coverage Area to Barn Size
The coverage area rating on every booster assumes ideal conditions: at least 3 bars of outdoor signal and a single open indoor space. In real-world conditions with metal walls and roofing, plan on 50 to 70 percent of the rated coverage. A booster rated for 5,000 square feet will realistically cover 2,500 to 3,500 square feet in a typical metal barn.
For a small barn under 1,500 square feet, the CELSGN P50 or SureCall Flare 3.0 will do the job. For a medium barn in the 2,500 to 5,000 square foot range, the weBoost Home MultiRoom or HiBoost 8K is a better fit. For a large barn over 5,000 square feet, look at the HiBoost 15K, weBoost Home Complete, or weBoost Metal Building series.
Check Your Outdoor Signal First
Before buying any booster, walk outside your barn and check your phone’s signal strength. You need at least 1 to 2 bars of LTE or 5G for any booster to work. With zero bars outside, no consumer booster will help. In that case, a high-gain LPDA antenna on a tall mast is your best bet, and even then, results are not guaranteed.
The weBoost app, HiBoost app, and SureCall app all include signal testing tools that show your exact signal in dBm, which is more precise than bars. Anything stronger than -100 dBm is workable. Anything weaker than -110 dBm will be a struggle even with the best booster.
Pick the Right Antenna Type
Three antenna types come up most in barn installations. Omni antennas pull in signal from all directions, which is convenient but lower gain. Yagi antennas are directional with moderate gain, good for towers 3 to 5 miles away. LPDA antennas are highly directional with the highest gain, ideal for distant towers more than 5 miles away.
For most barns in semi-rural areas, a Yagi antenna is the right balance. For remote barns far from any tower, the LPDA in the weBoost Metal Building 100 is worth the premium.
DIY vs Professional Installation
Most consumer boosters are designed for DIY installation. If you are comfortable on a ladder, can drill through a wall, and have basic hand tools, you can install a booster in an afternoon. The weBoost, HiBoost, and SureCall apps all guide you through aiming, mounting, and testing.
Professional installation makes sense if your barn has unusual height, you are uncomfortable with roof work, or you want the system integrated with other infrastructure like a security camera or internet system. Expect to pay a few hundred dollars for professional installation on top of the booster cost.
Frequently Asked Questions
Do signal boosters actually work in metal buildings?
Yes, signal boosters work very well in metal buildings when installed correctly. The outdoor antenna must be mounted above the roofline to capture signal before the metal walls block it. Once amplified, the indoor antenna rebroadcasts the signal inside. A properly installed booster in a metal barn can take you from zero bars to 4 or 5 bars of reliable service.
What is the best cell phone booster for a metal building?
The weBoost Home Complete is the best overall booster for most metal buildings, with up to 7,500 sq ft of coverage and the strongest amplification the FCC allows. For barns more than 5 miles from a cell tower, the weBoost Metal Building 100 with its high-gain LPDA antenna is purpose-built for the challenge. For tighter budgets, the SureCall Flare 3.0 covers smaller metal buildings well.
How do cell phone boosters work?
A cell phone signal booster is a three-part system. An outdoor antenna captures existing cellular signal from the nearest cell tower, an amplifier strengthens that signal, and an indoor antenna rebroadcasts the boosted signal throughout your space. The booster cannot create signal from nothing, so you need at least 1 to 2 bars of outdoor signal for the system to work effectively.
What is the best cell phone signal booster for rural areas?
For rural areas, choose a booster with a high-gain directional outdoor antenna. The weBoost Metal Building 100 with its LPDA antenna reaches towers up to 10 miles away. The weBoost Home MultiRoom and HiBoost 15K 2.0 SL are also strong choices for rural properties, both with Yagi antennas that work well for towers 3 to 5 miles distant. Match the booster to your specific distance from the nearest tower.
Final Verdict: Which Barn Signal Booster Should You Buy?
After testing and researching the best cell phone signal boosters for barns, my top pick for most farm owners is the weBoost Home Complete. It is the most powerful consumer booster the FCC allows, covers up to 7,500 square feet, and works with every U.S. carrier simultaneously. For larger pole barns or barndominiums, it is hard to beat.
If you want the best value, the HiBoost 15K 2.0 SL delivers the most coverage (12,000 square feet with dual indoor antennas) at a much lower price. The included app makes aiming and tuning the system straightforward, even for first-time installers.
For smaller barns under 2,000 square feet or tighter budgets, the SureCall Flare 3.0 and CELSGN P50 both get the job done without overpaying. For metal barns more than 5 miles from the nearest cell tower, the weBoost Metal Building 100 with its high-gain LPDA antenna is purpose-built for that exact scenario.
Whatever model you choose, mount the outdoor antenna as high as you safely can, aim it carefully toward the nearest cell tower using the booster’s app, and use quality coax cable for any long runs. Do those three things and you will go from a frustrating dead zone to reliable cell service inside your barn, even with a metal roof overhead.