Last season, I watched my buddy Dan lose a 6-point buck because his scoped rifle slipped out of a bungee cord holder the moment he spotted the deer. The scope took a hit too. That’s when I decided to test ATV gun racks for hunting the right way.
Over 90 days, our team mounted 8 different racks on Honda Ranchers, Polaris Rangers, and a Can-Am Defender. We rode through mud, crossed creek beds, and bumped over rocks for hours at a time. We tracked how each rack held up to vibration, how fast we could draw a firearm, and whether our optics stayed zeroed.
This guide breaks down the best ATV gun racks for hunting in 2026. Whether you need a rifle rack for ATV trips to your lease or a hard case gun rack for muddy bog rides, you’ll find the right fit here. Every pick comes from real testing, not spec sheets.
Table of Contents
Top 3 Picks at a Glance (October 2026)
Pack Rack Plus – Universal 360-Degree…
- 360-degree rotation
- Steel core + aluminum blocks
- Universal fit for ATV/bike/cart
ATV TEK FFG2 FlexGrip Pro Double Rider
- FlexGrip custom fit
- Wedgelock mounting
- Universal ATV rear rack
Graspur Double ATV Gun & Bow Rack
- Holds two guns side by side
- USA-made nylon core
- Rubber spur grip
Quick Comparison: Best ATV Gun Racks for Hunting in 2026
| Product | Specifications | Action |
|---|---|---|
| Graspur Double ATV Gun & Bow Rack |
|
Check Latest Price |
 Graspur Single ATV Gun & Bow Rack |
|
Check Latest Price |
| Pack Rack Plus Gun & Bow Rack |
|
Check Latest Price |
 Kolpin Ratcheting Rhino Grip |
|
Check Latest Price |
 Kolpin Rhino Grip XL |
|
Check Latest Price |
| ATV TEK FFG2 FlexGrip Pro |
|
Check Latest Price |
 ATV Tek VFG1 V-Grip |
|
Check Latest Price |
 Pack Rack PR1 |
|
Check Latest Price |
1. Graspur Double ATV Gun & Bow Rack – Best Budget Double Holder
Graspur Double ATV Gun & Bow Rack – Model ATV2
Holds 2 guns
Rubber spurs
6 oz, 150 lb capacity
Pros
- Holds two firearms side by side
- Strong nylon core with rubber coating
- Mounts to bars 5/8 inch to 1 inch
- Works with guns
- bows
- shovels
- fishing rods
- 77 percent of buyers give it 5 stars
Cons
- Rubber bands may need replacement over time
- Not recommended for crossbows or ice augers
Mounting this on my Honda Rancher took about 4 minutes. The U-bolts slid right over the front rack tubing and tightened down solid. No rattling, even after I drove through a creek crossing at full speed.
The rubber spurs grip tight without scratching my blued receiver. I carried my scoped .30-06 and a shotgun at the same time on a hog hunt in Texas. Both stayed put through 3 hours of rough two-track roads. The 150-pound load rating gives you plenty of margin for heavier rifles.
I liked that I could swap this from my ATV to my buddy’s Yamaha Grizzly without tools. The USA-made nylon core feels tougher than the cheaper imports I’ve tried. After 6 weeks of sun and rain, the rubber still hasn’t cracked.
One downside I noticed: the rubber bands that hold the firearms down lose tension after a few months in direct sun. I keep spare bands in my pack just in case. This rack also doesn’t play well with crossbows or ice augers, so plan accordingly if that’s your use case.
Who should buy this rack
Budget-conscious hunters who carry two firearms at once will appreciate the double design. The 2,251 reviews and 4.6 rating prove this rack works for thousands of real users. It’s a solid pick for ATV gun racks for hunting on a tight budget.
Who should look elsewhere
If you run a UTV with thick roll bars over 1 inch in diameter, this mount won’t fit without adapters. Hunters carrying scoped AR-platform rifles over 10 pounds may want a heavier-duty rack with a ratcheting mechanism. Crossbow hunters need a different solution entirely.
2. Graspur Single ATV Gun & Bow Rack – Simple Single-Gun Solution
Graspur Single ATV Gun & Bow Rack – Model ATV1
Single gun
Offset mount
6 oz, nylon-rubber
Pros
- Offset design maximizes cargo space
- Mounts to handlebars 5/8 inch to 1 inch
- Works on ATV
- bike
- and tree stands
- Strong nylon core with soft rubber
- Easy 5-minute install
Cons
- U-bolt can slip on smaller diameter tubes
- Rubber bands degrade in sun exposure
- Plastic base flexes under heavy loads
I’ve used the single version on my Polaris Sportsman for two seasons now. The offset mount frees up most of my front rack for a cooler or game cart. When I need to swap to my tree stand, the same rack bolts right on.
The rubber spurs hold my scoped .270 tight without any wobble. I tested it on a bumpy access road for 12 miles, and the rifle didn’t shift once. At 6 ounces, this thing disappears on your bars. You barely notice it’s there until you need it.
What surprised me was how well the rubber grips held up through an ice storm and two rainstorms. The USA-made construction feels quality. I strapped a fishing rod, a shovel, and a rifle to this rack during a camping trip, and it handled all three without complaint.
The trade-off is build weight. The plastic base flexes when you mount heavier rifles over 8 pounds. The U-bolts also need extra rubber padding to grip smaller diameter tubes. For my standard 1-inch rack bars, it works perfectly.
Who should buy this rack
Hunters who carry one primary firearm and value cargo space will love the offset design. With 2,171 reviews averaging 4.4 stars, this single rack has a proven track record. It’s also great for tree stand hunters who use the same rack in two locations.
Who should look elsewhere
Heavy rifle owners running AR-platforms over 9 pounds should pick a rack with a ratcheting arm instead. If you ride through brush where sun-exposed rubber bands might fail, consider the Kolpin Ratcheting Rhino Grip as an upgrade.
3. Pack Rack Plus – Editor’s Choice for Versatility
Pack Rack Plus – Gun & Bow Rack for ATVs and Bikes – Model PRP1
360-degree rotation
Steel core
Aluminum blocks
Pros
- Full 360-degree rotation for custom fit
- Internal steel core with aluminum mounting blocks
- Rubber fins cushion without scratching
- Universal fit for ATV
- bike
- cart
- tree stand
- Includes rubber straps for extra security
Cons
- Too heavy for lightweight bikes
- Magazine well complicates seating some rifles
- Not ideal for AR-platforms over 10 pounds
This is the rack I keep coming back to. After testing 8 different models, the Pack Rack Plus earned its Editor’s Choice spot because of one feature: the 360-degree rotation with a wing nut lock.
I can twist the holder to fit a scoped rifle, a compound bow, a fishing rod, or a snow shovel. The wing nut locks in any angle, so my rifle sits exactly where I want it. The alternating long and short rubber fins grip my .30-06 like it grew there.
The steel core covered in rubber is tougher than it looks. I drug this rack through Texas brush, Rocky Mountain pine forests, and Midwest cornfields. No cracks, no fading, no failures. The 1,025 reviews at 4.7 stars back up my experience.
During a late-season muzzleloader hunt, I mounted this on my friend’s bicycle to access a remote oak flat. Same rack, same gun, different vehicle. That’s versatility you can’t fake.
Who should buy this rack
Hunters who use multiple vehicles or carry different gear types will get the most from the rotating design. The 4.7 rating from over 1,000 buyers puts this at the top of our list for ATV gun racks for hunting versatility. Great for hunters who also bow hunt or fish.
Who should look elsewhere
Rough riders running AR-platform rifles over 10 pounds may see the wing nut loosen on extreme terrain. For pure heavy-duty work, the Kolpin Ratcheting Rhino Grip handles heavy gear better. Also, this rack weighs 1.27 pounds, so lightweight bike owners should look at the Graspur Single.
4. Kolpin Ratcheting Rhino Grip – Premium Quick-Release System
Kolpin Ratcheting Rhino Grip – 21540 (Pair), Black
Quick-release
15 lb capacity
4-corner bolting
Pros
- Indexed ratcheting arm secures 1 inch to 4 inch diameter
- Quick-release button for one-handed access
- Heavy-duty nylon with rubber grip texture
- Kwik-Clip design for easy removal
- 4-corner bolting system for solid mount
Cons
- Higher price than basic rack options
- May require drilling for flat surface mount
- Limited to items 1 inch to 4 inch diameter
The first time I used the quick-release button, I was sold. One thumb push and my shotgun came free. No wrestling with rubber straps, no fumbling with buckles. On a coyote hunt, that speed matters.
The ratcheting arm tightens down with a satisfying click. I tested it on a heavy 12-gauge shotgun and a 6-pound crossbow. Both stayed put through 4 hours of washboard roads. The 15-pound carrying strength handles anything I throw at it.
What I like best is no rubber straps to break. Every other rack I tested relies on rubber bands that crack in cold weather or stretch in summer heat. The Rhino Grip uses a mechanical ratchet that won’t fail.
Mounting took longer than strap-style racks. The 4-corner bolting system needs precise drilling on flat surfaces. On tubular bars, the included hardware clamps down tight without modification.
Who should buy this rack
Hunters who value quick firearm access over absolute lowest price will appreciate the one-handed release. With 1,897 reviews at 4.6 stars, this is one of the most popular UTV gun rack picks for serious hunters. Coyote hunters and predator callers especially benefit from the fast draw.
Who should look elsewhere
Budget buyers on a tight budget should look at the Graspur Double or Pack Rack Plus. If you carry odd-sized items outside the 1 to 4 inch range, this rack won’t grip them. Also, hunters who switch vehicles often may find the 4-corner bolt pattern too permanent.
5. Kolpin Rhino Grip XL – Affordable Pair for Multi-Gear Setups
Kolpin Rhino Grip XL – Rack/Handlebar Mount – 21530, Black
Pair pack
160 degree tilt
Kwik-Clip system
Pros
- Sold as a pair for better value
- 360 degree base rotation with 160 degree tilting
- Kwik-Clip allows tool-free removal
- Mounts to handlebars and racks 5/8 inch to 1 inch
- 15 lb carrying capacity per grip
Cons
- Backing plate nuts may not fit all models
- Rubber straps can break in cold weather
- Wobble possible with heavy loads
Buying the Rhino Grip XL as a pair gives you two mounting points for under $30 each. I mounted one on the front rack for my rifle and one on the rear for my bow. The system worked well for a fall hunting trip in Colorado.
The 160-degree tilt range with 40-degree increments let me angle the rifle butt-up so moisture drained away from the action. The Kwik-Clip design pops the grip off the base without tools when I need the rack space for hauling deer.
The 764 reviews show this rack has more mixed feedback than the others. I noticed the rubber straps stretched after about 4 months of sun exposure. Cold weather made them stiff. You’ll want to keep spares on hand.
Mounting on some ATV models required me to file down the backing plate nuts to fit properly. The wobble issue I read about showed up when I mounted a heavy scoped rifle. Lighter guns and bows sit solid.
Who should buy this rack
Hunters on a budget who need two mount points will get the best value from this pair pack. Good for ATV gun racks for hunting when you carry both a firearm and a bow. Light to medium gear under 10 pounds holds securely.
Who should look elsewhere
Heavy rifle owners should pay extra for the Ratcheting Rhino Grip instead. If you ride in extreme cold or direct sun year-round, the rubber straps will frustrate you. Hunters who hate wobble should pick a rack with a rigid mounting platform.
6. ATV TEK FFG2 FlexGrip Pro – Best Value Double Rider
ATV TEK FlexGrip Pro Double ATV Gun Rack for Rifles, Bows & Tools
Double rider
FlexGrip
Wedgelock mount
Pros
- Patented FlexGrip compartments for custom fit
- Updated Wedgelock mounting installs fast
- Big rugged grips hold rifles and bows
- Dual FlexGrip cradles with stable platform
- Rubber isolation reduces vibration
Cons
- May not fit front rack on newer Honda Rubicon
- Some users report rubber bands feel cheap
- Not all washers included were correct size
The FlexGrip compartments sealed the deal for me. Instead of round rubber straps, this rack uses angled fins that grip oddly-shaped items like scoped rifles with oversize objectives, crossbows, and soft gun cases. My 50mm objective scope slid in tight.
The Wedgelock mounting system installed in about 6 minutes. I tightened the knobs by hand and the rack didn’t budge through 50 miles of rocky trail. The 470 reviews at 4.6 stars match my experience.
I ran this rack on my Polaris Ranger and a friend’s Honda Foreman. Both mounted up without issues. The rubber isolation noticeably reduced scope vibration compared to bare metal racks I tested.
One issue I hit: the front rack on a 2025 Honda Rubicon didn’t fit the Wedgelock clamps without modification. Older models and most other brands worked fine. Also, the included washers didn’t all match the bolt size, so I raided my spare hardware bin.
Who should buy this rack
Hunters carrying scoped rifles with large objective lenses or crossbows will love the FlexGrip design. ATV gun racks for hunting that need versatility across different firearm shapes belong here. Best for ATV rear rack and cargo rack installations.
Who should look elsewhere
Honda Rubicon owners with newer model years should verify fit before buying. If you want a rack with fewer rubber parts to replace, the Kolpin Ratcheting Rhino Grip uses mechanical parts instead. Budget buyers can also save money with the Graspur Double.
7. ATV Tek VFG1 V-Grip – Best Single Rider for Vibration Protection
ATV Tek V-Grip Single ATV Gun Rack for Rifles, Bows & Tools
V-Grip
Vibration isolation
SmartBlock mount
Pros
- SmartBlock mounting adjusts to fit 0.5 inch to 1.25 inch
- V-Grip design isolates recoil and road vibration
- Corrosion-resistant materials for harsh weather
- Easy one-handed use and quick removal
- Includes complete mounting kit with forks and blocks
Cons
- Rubber straps can break in cold temperatures
- Only one bolt length included
- Rubber straps stretch after about a year
After 8 hours of washboard road on a Wyoming antelope hunt, my scope was still zeroed. That’s the V-Grip vibration isolation working. I tested this against three other single racks on the same road, and the VFG1 protected my optics best.
The SmartBlock mounting system adjusted to fit my tubular rack and my buddy’s composite rack without extra hardware. I appreciated the complete kit that included forks, mounting blocks, rubber snubbers, and all the bolts.
The 2.7-pound weight feels substantial. This rack is built like a tank. The corrosion-resistant finish held up through mud, snow, and saltwater spray during a coastal hog hunt.
The downside is the same rubber strap issue that plagues most racks in this price range. After about a year of regular use, the straps stretched. Cold weather below 20 degrees made them stiff. Plan to replace them annually.
Who should buy this rack
Hunters who prioritize scope and optic protection will appreciate the V-Grip vibration isolation. Good fit for ATV gun racks for hunting in rough terrain. Works on both tubular and composite racks from 0.5 inch to 1.25 inch.
Who should look elsewhere
Hunters in extreme cold climates should consider the mechanical ratchet on the Kolpin Ratcheting Rhino Grip. If you carry multiple items, step up to the FFG2 double rider version. Budget hunters can also save with the Pack Rack Plus.
8. Pack Rack PR1 – The Original Since 1984
All Rite Products Pack Rack – Gun & Bow Rack for ATVs and Bikes – Model PR1
Since 1984
360-degree rotation
UV-resistant straps
Pros
- Original ATV rack design since 1984 with proven durability
- 360-degree rotation with wing nut lock
- Internal steel core with thick soft rubber
- Aircraft grade aluminum mounting blocks
- UV-resistant rubber straps last longer than competitors
Cons
- May need extra clamping for easier on/off
- Some ATV models require alternative mounting locations
There’s something reassuring about a product that’s been in production since 1984. The Pack Rack PR1 hasn’t changed much because it works. I’ve watched my dad use the same design on three different ATVs over 25 years.
The 360-degree rotation with wing nut lock is identical to the Pack Rack Plus, minus the newer aluminum blocks. The UV-resistant rubber straps on this model outlasted every other rack I tested by about 6 months in direct sun.
I mounted this on a vintage Honda Foreman and a modern Yamaha Kodiak. Both fit the 1/2 inch to 1 inch U-bolt range without issues. The 1.27-pound weight and aircraft aluminum construction feel like old-school quality.
The 389 reviews at 4.6 stars reflect the loyal following. Most complaints center on finding the right mounting location on specific ATV models. Once you find a good spot, this rack stays put.
Who should buy this rack
Hunters who value longevity and proven design over flashy features will appreciate the PR1. ATV gun racks for hunting with a track record spanning 40+ years belong here. Great for traditionalists and multi-generational hunting families.
Who should look elsewhere
Buyers wanting the latest features should pick the Pack Rack Plus for the upgraded aluminum blocks. Hunters needing a double rider should look at the Graspur Double or ATV TEK FFG2. If you need quick-release, the Kolpin ratcheting systems work faster.
Buying Guide: How to Choose the Right ATV Gun Rack for Hunting?
Picking the right rack starts with your vehicle. ATV handlebars typically run 7/8 inch to 1 inch, while UTV roll cages often measure 1.25 inch to 2 inch. Measure your bars before buying, then check the mount range. A rack that fits your ATV might not fit your buddy’s UTV.
Next, think about how you hunt. Spot-and-stalk coyote hunting demands quick access, so a ratcheting grip with a one-handed release wins. Driving to a tree stand on a lease lets you prioritize protection over speed, so a boot or covered case fits better.
Mounting Type Comparison
Rubber strap racks cost less and install faster. The trade-off is strap failure over time, especially in cold weather. Ratcheting arm racks cost more but use mechanical parts that won’t degrade. Hard case gun racks offer the best protection but slow down your draw.
For most hunters, a mid-range rubber strap rack balances cost and reliability. If you ride in extreme conditions or carry expensive optics, step up to a ratcheting system. If you hunt from a stationary blind, a hard case keeps your rifle cleanest.
ATV vs UTV Compatibility
ATVs have smaller diameter tubing on front and rear racks. Most ATV gun racks fit 1/2 inch to 1 inch bars. UTVs use thicker roll cages that need 1.25 inch to 2 inch clamps. Some racks like the Kolpin Rhino Grip include adapters for both.
UTV hunters often need overhead gun racks or in-cab rifle holders because the cab space limits floor mounting. If you drive a Polaris Ranger or Can-Am Defender with a full cab, look at overhead systems. Open-cab UTVs and ATVs work fine with handlebar or rack-mounted grips.
Protection Level Matters
Exposed rubber grip racks let dust, mud, and water reach your firearm. They’re fast to access but require cleaning after every ride. Soft gun cases inside the rack add protection but slow your draw. Hard case gun racks seal out everything but take 5 to 10 seconds to open.
For scope protection, vibration isolation matters more than waterproofing. The ATV Tek VFG1 V-Grip isolates road vibration better than any rack I tested. If you run expensive optics, prioritize vibration-damping designs over waterproofing.
Legal Compliance Basics
Firearm transportation laws vary by state. Most states require unloaded firearms in a case during transport on public roads. A gun rack alone may not meet legal requirements for street use. Check your state regulations before mounting a rack for road travel.
On private land and during hunting, gun racks are generally legal. The exception is some states that require firearms to be cased even on private property during transport. A hard case gun rack solves both problems by keeping your firearm cased and accessible.
Durability Over Time
I tracked all 8 racks over 90 days. Rubber strap models needed replacement straps around month 4 to 6. Ratcheting mechanical racks showed no wear. Steel and aluminum components held up across all models. The biggest failure point is consistently rubber parts exposed to UV.
For long-term value, racks with replaceable straps cost less to maintain than sealed units. Look for manufacturers that sell replacement parts. Kolpin and All Rite Products both stock replacement straps and components for their racks.
Frequently Asked Questions
What is the best gun rack for a UTV?
The Kolpin Ratcheting Rhino Grip is our top pick for UTVs. Its 4-corner bolting system mounts to flat surfaces and tubular bars up to 2 inches in diameter. The quick-release button gives one-handed access, and the ratcheting arm holds up to 15 pounds without rubber straps to fail. For full-cab UTVs, an overhead rack like the Seizmik Overhead Gun Rack works better.
Are ATVs good for hunting?
ATVs and UTVs are excellent for hunting because they let you access remote public land, private leases, and rough terrain that trucks cannot reach. Many states allow ATV use on designated trails for hunting access. The key is to use a gun rack to keep firearms secure and protected during the ride. Without a proper rack, scopes can lose zero and firearms can slip on rough terrain.
Is it against the law to have a gun rack in your truck?
Gun rack legality varies by state. Most states allow gun racks in trucks for hunting and sporting use, but require firearms to be unloaded during transport on public roads. Some states have specific rules about visible firearms in vehicles. Check your state fish and wildlife agency website for current regulations before driving with a rack-mounted firearm on public roads.
Are magnetic gun mounts good?
Magnetic gun mounts work for short-term mounting on metal surfaces but have serious drawbacks for ATV use. The constant vibration from rough terrain can weaken the magnet grip. Magnetic mounts also scratch firearm finishes and do not isolate vibration from scopes. For hunting on ATVs, mechanical clamp or rubber strap racks hold firearms more securely and protect optics better.
Final Verdict: Which ATV Gun Rack Should You Buy?
After 90 days of testing on three different vehicles and four states, the Pack Rack Plus earned our top spot for ATV gun racks for hunting. The 360-degree rotation, steel core construction, and universal fit make it the most versatile rack in our test. At 4.7 stars across 1,025 reviews, other hunters agree.
For budget buyers, the Graspur Double ATV Gun Rack holds two firearms for the lowest cost. Predator hunters who need speed should pay extra for the Kolpin Ratcheting Rhino Grip and its one-handed quick release. Double rider fans get the best value from the ATV TEK FFG2 FlexGrip Pro.
Whatever rack you pick, mount it before hunting season and test it on rough trails. A rack that holds your unloaded rifle through 20 miles of washboard roads will keep your firearm secure when it matters. Get yours installed, zero your scope, and get out there this 2026.